Frigidaire Horizon 2000 Washer Manual

Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle. NOTE: This part has been redesigned by the manufacturer and is interchangeable with the old design. You must remove the front panel from your Frigidaire Affinity washing machine to complete most repairs. The procedure is easy if you have a top-load model. If you have a front-load model, you have to remove the top panel, the control board and the drum-seal boot before removing the front panel. Fortunately, you’re in the right place when something goes wrong. Repair Clinic carries the genuine Frigidaire replacement parts that match your washer, whether you own the popular 4.1 cubic foot high efficiency top-load washer, the Frigidaire Gallery 3.5 cubic foot front load washer, or any other model. The very first load run in it showed an amazing difference from the WP DD Design 2000 washer I'd replaced with the 'Tag. My current 'Tag washer is an 806, and it's a great cleaner, too. Post# 614309, Reply# 21 8/2/2012 at 19:48 (3,017 days old) by whirlykenmore78 (Prior Lake MN (GMT-0600 CDT.)). Download 684 Frigidaire Washer PDF manuals. User manuals, Frigidaire Washer Operating guides and Service manuals.

ChrisWNY

Premium Member

Frigidaire Horizon 2000 Washing Machine Manual

I have a 3-yr old Frigidaire Gallery top-loading model that has become noisy, squealing especially when the spin-dry cycle begins, the noise has become progressively worse over the past month or so. I've removed the front cover and noticed that there were belt fibers sprayed all over the place, I vacuumed them out with a Shop-Vac and ordered a couple of replacement belts (134511600 : V-Belt,washer drive ,standard 4L) from an online vendor, as I believe this may be the cause of my issues (though I'd appreciate if an expert would confirm this or not).
At any rate, is there anything else I should do in terms of servicing the washer while I have it opened up? Does anything need oiling or is there something that I should be cleaning inside the washer? Are worn belts most often responsible for loud squealing during the start of the spin cycle? Any info is appreciated. Thanks.
- Chris